دوره Certified Data Center Professional - CDCP
خلاصه دوره CDCP
هدف دوره CDCP معرفی اجزای اصلی و کلیدی مراکز داده در حوزه زیر ساخت می باشد. در دوره CDCP نحوه محاسبات و معیارهای تصمیم گیری و معرفی بخش های مختلف مرکز داده اعم از: برق، سرمایش، امنیت فیرزیکی، کابل کشی، ایمنی و ... مطرح می گردد. به منظور دستیابی به دسترس پذیری بالا در مراکز داده، بخش های اصلی بهره برداری و نگهداری از مراکز داده نیز عنوان می گردد. دوره CDCP یکدوره بین المللی تدوین شده توسط مجموعه EPI می باشد.
مدت دوره CDCP:
16 ساعت
پيش نياز دوره CDCP:
ندارد
مخاطبین دوره CDCP:
مدیران، مهندسین و دانشجویان حوزه فناوری اطلاعات، صاحبان مراکز داده، بهره برداران مراکز داده
اهداف دوره CDCP:
هدف این دوره دو روزه معرفی اجزای اصلی و کلیدی مراکز داده در حوزه زیر ساخت می باشد. در دوره CDCP نحوه محاسبات و معیارهای تصمیم گیری و معرفی بخش های مختلف مرکز داده اعم از: برق، سرمایش، امنیت فیرزیکی، کابل کشی، ایمنی و ... مطرح می گردد. به منظور دستیابی به دسترس پذیری بالا در مراکز داده، بخش های اصلی بهره برداری و نگهداری از مراکز داده نیز عنوان می گردد.
در انتهای دوره CDCP دانشجویان قادر خواهند بود:
- انتخاب محل فیزیکی مناسب و استاندارد جهت احداث مرکز داده بر اساس نیاز های فعلی و همچنین برآورد نیازهای آینده
- توضیح تمام اجزای ضروری مرکز داده جهت دسترس پذیری بالا
- بررسی استانداردهای مختلف
- تفاوت های تکنولوژی های مختلف در بخش UPS ، سیسامهای اعلام و اطفا حریق، سیستم سرمایش، سیستم مانیتورینگ (پایش)، کابل کشی و ... در مراکز داده
- بررسی سیستم توزیع برق به منظور کاهش زمان downtime
- افزایش بهره وری سیستم های سرمایش با استفاده از ترکیب متد های قدیمی و تکنولوژی روز دنیا
- ایجاد قراردادهای سرویش و نگهداری متناسب با نیاز مراکز داده
- و ...
سرفصل دوره Certified Data Center Professional - CDCP
1- The Data Centre, it’s Importance and Causes for Downtime
2- Data Centre Standards and Best Practices
3- Data Centre Location, Building and Construction
- Selecting appropriate sites and buildings and how to avoid pitfalls
- Various components of an effective data centre and supporting facilities setup
4- Raised Floor/Suspended Ceiling
- Uniform, concentrated and rolling load definitions
- Applicable standards
- Raised floor guidelines
- Signal Reference Grid, grounding of racks
- Disability act and regulations
- Suspended ceiling usage and requirement
5- Light
- Standards
- Light fixture types and placement
- Emergency lighting, Emergency Power Supply (EPS)
6- Power Infrastructure
- Power infrastructure layout from generation to rack level
- ATS and STS systems
- Redundancy levels and techniques
- Three-phase and single-phase usage
- Power distribution options within the computer room
- Power cabling versus bus bar trunking
- Bonding versus grounding
- Common Mode Noise and isolation transformers
- Distribution boards, form factors and IP-protection grades
- Power quality guidelines
- Real power versus apparent power
- How to size and calculate load in the data centre
- Generators
- Static and dynamic UPS systems, selection criteria, how they operate and energy efficiency option
- Battery types, correct selection and testing
- Thermo-graphics
7- Electro Magnetic Fields
- Electrical fields and magnetic fields definitions and units of measurements
- Sources of EMF
- Effects of EMF on human health and equipment
- (H)EMP
- Standards
- EMF shielding solutions
8- Equipment Racks
- Rack standards, properties and selection criteria
- Security considerations
- Power rail/strip options
9- Cooling Infrastructure
- Temperature and humidity recommendations
- Cooling measurement units and conversion rates
- Sensible and latent heat definitions
- Differences between comfort and precision cooling
- Overview of different air conditioner technologies
- Raised oor versus non-raised floor cooling
- Placement of air conditioner units and limitations to be observed
- Supplemental cooling options
- Cold aisle/hot aisle containment
10- Water Supply
- Importance of water supply and application areas
- Backup water supply techniques
11- Designing a Scalable Network Infrastructure
- The importance of a Structured Cabling System
- Planning considerations
- Copper and Fiber cable technology and standards
- ANSI/TIA-942 Cabling hierarchy and recommendations
- Testing and verification
- SAN storage cabling
- Network redundancy
- Building-to-building connectivity
- Network monitoring system requirements
12- Fire Suppression
- Standards for fire suppression
- Detection systems
- Various total flooding fire suppression techniques and systems, their benefits and disadvantages
- Handheld extinguishers
- Signage and safety
- Regulatory requirements and best practices
13- Data Centre Monitoring
- Data centre monitoring requirements
- EMS versus BMS
- Water leak detection systems
- Notification options and considerations
14- Operational Security and Safety Practices
- Data centre security layers
- Physical, infrastructure and organizational security
- Safety measures and essential signage
15- Labelling
- Choosing a labelling scheme
- Recommended labelling practices
- Network labelling
16- Documentation
- How to setup proper documentation
- Document management policies and procedures
17- Cleaning
- Cleaning practices for the data centre
18- MTBF/MTTR
- Standards and definitions
- Calculation models
- The ‘real’ value
19- MTBF/MTTR
- Maintenance Contracts/SLA/OLA
جزئیات سرفصل آموزشی دوره Certified Data Center Professional - CDCP را از طریق لینک زیر دریافت کنید:
دوره CDCP در سماتک بر اساس سرفصل های بین المللی و توسط اساتید باتجربه در این حوزه برگزار می شود. اساتید سماتک برای دوره CDCP دارای تجربه کاری در زمینه طراحی و نگهداری مراکز داده می باشند و علاوه بر دانش طراحی مرکز داده، تجربیات ارزشمند خود را به دانشجویان حاضر در دوره CDCP انتقال می دهند. برای شرکت در دوره CDCP می توانید از طریق تلفن با شماره 88738394 تماس بگیرید.